Arrangement of downhill skiing

Every skier knows how disgusting it is to ski with poorly fitted, incorrectly sized or unnecessarily stiff shoes.
  • Before going to the ski shop you should start by doing at home foot analysis www.cinderellafit.net instructions and you take it according to the movement
  • When you are in the store, measure your feet with the manufacturer's size gauge, which gives basic information about the correct size
  • Next, check the correct size to ask the dealer to remove the mono insoles and remove the insole from them.
  • Then stand on the insole and check that there is 4-8 mm of space in front of the toes.
  • Now place the foot drawing on the insole to get an idea of ​​how the selected size fits the foot in terms of width. This test really amazes many because almost always the width of the foot exceeds the width of the insole in the width direction. This information indicates the need for any further modification required in the outer shell, mainly at the point of attachment to the scalp and toe. When choosing, it is very important to consider the total volume of the mono and not just the length.
  • Next, you should check the width of the mono heel by stepping on the full weight of the scarf I am afraid of to see if your heel fits well in the mono heel cup. If the heel width of the mono is not enough then it will easily lead to choosing too large a size. In this same context, you can also check the correct size also by pressing your foot towards the tip of the mono and looking at how much space is left behind the heel and it should be 2-3 cents.
  • Now ask the dealer to put the inner shoe back in the shell and put them on the foot.
  • When the boots are on the foot, kick your heel firmly into the heel cup of the boo and close the links to medium stiffness. Now stand with your feet straight so that you feel the toe of the inner shoe on your toes and now push your knees forward to the downhill position
Now the length of the mono is correct The width of most ski boots sold is 98 to 108 mm, depending on the manufacturer.
When these things described above are in order, it is worth remembering that all the outer shells of the monos can be customized up to 30 mm on each side of the outer shell. Today, mono plastics really differ a lot between different manufacturers, so modifying them requires really high precision / the right tools and craftsmanship. Nowadays, milling is impossible to use at any stage in the design of the outer shoe because it is simply not possible because they are so thin.
Many stores also often recommend shaped boys as additional sales, but they have very little effect, at least in improving fit. Many stores also offer “oven” boots / insoles, which, however, are marginal.
In the case of an inner shoe, “firing” helps to detect pressure points that often lead to the shaping of the outer shoe In the case of the outer shoe, “firing” is very rarely useful because they return to their former shape when they cool down and the heating of the entire shell is completely unnecessary because usually the necessary additional modifications are made to small areas of the pressure house
CinderellaFit NOW ALSO OFFERS A FREE SERVICE IF YOU WANT TO CHECK YOUR MONO SELECTION IN ADVANCE.